SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Parts for Forklift
Used Forklift Part - Eventually, lift truck components would wear and have to be replaced. Purchasing brand new components could become a costly venture so one more idea is to acquire used lift truck parts. This can save much cash in the long run. It is a good idea to obtain used lift truck components that have been reproduced. These parts would guarantee that you are getting components which will work for a long time and be productive.
Broken or worn parts that are reproduced are a less expensive answer compared to rebuilding. With rebuilding parts, only the parts that are worn out or broken get replaced, which means that other wearable parts could break down soon after purchase.
Remanufactured parts are cleaned after being taken apart and have the unusable parts replaced. This technique could provide the best guarantee for used components. All wearable parts are replaced regardless of age or wear which is another reason why reproduced parts in general operate so much better. Any part within the part is brand new and this provides far longer life to the used part. Depending on the forklift parts that are being redone, the cleaning process and the complete remanufacturing process will vary.
After complete disassembly, the engines are oven cleaned. Various parts of the engine like rings, pistons, spark plugs, valves, valve springs, and filters could be replaced during the remanufacture process. The engines are hot tested after reassembly to guarantee that there are no leaks, no noises, no oil pressure problems or any vacuum.
Transmissions are disassembled, oven cleaned and pressure washed. A comprehensive examination is done to be able to check for any cracks. Bushings, seals and bearings are all replaced. Usually, the replacement parts used on transmission components meet OEM specifications.
A few components such as the alternator, the water pump, torque converters, the starter and steer axles can get longer serviceability after being remanufactured and having all wearable parts replaced. The electronic control in the electric forklift is maintained by the control card. This particular card can also be reproduced with replacing all aged and worn out parts. Unlike other forklift components the control card can only have the worn and aged parts replaced.
Components which are remanufactured have to be thoroughly checked upon reassembly to guarantee they are in good condition before being sold. When acquiring these parts, it is a good idea to be certain that they have undergone all of the proper testing and inspections. On certain larger components like for instance steer axles, engines and transmissions, OEM specification replacement components must be used.
The forklift dealer could ensure that the components they have remanufactured meet the OEM specifications. This will likewise guarantee the parts meet industry standards. Many details go into remanufacturing used components. This attention to detail offers more serviceability out of reproduced components than the parts that were just rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Everett, Washington
forkliftpartseverett.com
Email Us
About Us